Нова зубова борона Flex Harrow Green Way 5.3 m transformer












Якщо ви вирішили купувати техніку за низькою ціною, переконайтеся, що ви спілкуєтеся з реальним продавцем. Дізнайтеся якомога більше інформації про власника техніки. Один із способів обману - це представляти себе за реально існуючу компанію. У разі виникнення підозр повідомте про це нам для додаткового контролю, через форму зворотного зв'язку.
Перш ніж ви вирішите зробити покупку, уважно вивчіть кілька пропозицій з продажу, щоб зрозуміти середню вартість обраної вами моделі техніки. Якщо ціна вподобаної пропозиції набагато нижче аналогічних пропозицій, задумайтеся. Значна різниця у вартості може вказувати про приховані дефекти або про спробу продавця здійснити шахрайські дії.
Не купуйте товари, ціна яких значно відрізняється від середньої ціни на аналогічну техніку.
Не давайте згоди на сумнівні застави і передоплати товару. У разі сумнівів не бійтеся уточнювати деталі, просіть додаткові фотографії і документи на техніку, перевіряйте справжність документів, задавайте питання.
Найпоширеніший тип шахрайства. Нечесні продавці можуть запитувати певну суму авансу для «броні» вашого права на покупку техніки. Таким чином шахраї можуть зібрати велику суму і зникнути, більше не виходити на зв'язок.
- Переказ передоплати на карту
- Не вносьте передоплату без оформлення документів, що підтверджують процес передачі грошей, якщо під час спілкування продавець викликає сумніви.
- Переказ на рахунок «довіреної особи»
- Подібні прохання повинні насторожувати, скоріше за все, ви спілкуєтеся з шахраєм.
- Переказ на рахунок компанії зі схожою назвою
- Будьте пильні, шахраї можуть маскуватися під відомі компанії, вносячи незначні зміни в назву. Не переводьте кошти, якщо назва компанії викликає сумніви.
- Підстановка власних реквізитів в інвойс реальної компанії
- Перш ніж робити переказ, переконайтеся в правильності зазначених реквізитів, і чи належать вони до зазначеної компанії.
Контакти продавця




















crust breakdown and moisture retention in the soil;
weed control in the "white thread" stage;
even distribution of chopped straw and partial incorporation of crop residues (preservation of nitrogen in the soil);
reducing soil erosion;
soil preparation for sowing;
the cultivation of fallow lands (virgin lands);
steam processing;
incorporation of fertilizers into the soil.
flex harrow is used in different soil and climatic zones when processing soils of different texture with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
flex harrow are aggregated with wheeled and tracked tractors with engine power corresponding to the working width of a particular model;
the working body of the harrow - the tooth has a knife-like (rhombic) section and is made of high-strength steel. The approximate service life of the teeth is 8 hectares per tooth, which is approximately the distance covered by the tooth of 5000 km;
the rhombic section of the tooth, in comparison with the standard square section of the teeth, with which most harrows are equipped, allows, while ensuring all technological operations, to reduce the load on the tractor's tractive effort by up to 20%, which in turn allows the use of a tractor with a capacity of 80-370 hp. for aggregation with harrows with a working width of 5 to 24 m;
adjustment of the angle of attack of the teeth has 2 main positions: aggressive - 38 ° and passive - 50 ° and 4 additional positions;
the teeth are fixed on transverse rods, pivotally connected to each other in a 16-row train. And this, in turn, allows you to qualitatively copy the features of the relief during processing;
each 16-row train consists of two parts of 8 rows, which can be installed separately if necessary, for example, when the field is excessively clogged or the tractor is insufficiently powered;
the pitch of the tooth field when using a 16-row train is 15 mm, with a tooth width of 16 mm, i.e. with such an arrangement of teeth, 100% of the field area is processed.
Productivity at a speed of 12 km / h, ha / h ... 6.3
Working width of capture, m ... 5.28
Aggregation type ... trailed
Working length, m ... 9.36
Transport width, m ... 2.8
Transport height, m ... 3.7
Transport length, m ... 4.75
Working depth of tillage, mm ... 20-80
Number of loops, pcs ... 4
Number of loops during vineyard processing, pcs ... 2
Number of rows in a train, pcs ... 8 * 2 = 16
Number of standard teeth, pcs ... 352
Number of standard teeth for vineyard processing, pcs ... 160
Number of teeth on a length of 300 mm, pcs ... 20
Adjusting the angle of attack of the teeth ... 6 positions (2 main and 4 additional)
2 main positions ... 38 ° and 50 °
Tractor power not less, h.p. ... 88
Minimum number of hydraulic outlets ... 2
Pressure in the hydraulic system of the tractor, bar ... 180
Weight, kg ... 1910